Ford Powerstroke - 2008-2010 Ford 6.4L Powerstroke - Exhaust

Banks Power Monster Exhaust System Single Exit Black Tip 08-10 Ford 6.4 ECSB-CCSB Banks Power 49780-B New

Tested and refined by Banks engineers using Computational Flow Dynamics software, then validated through extensive temperature testing in all areas: before and after the DPF, 6 inch out from the tip, by the spare tire, shocks, wiring, hoses, and more. First we tested our own exhaust then we tested all of the competitors. They all tested hundreds of degrees hotter than Banks and stock!

The system safely clears the spare tire, shocks and brake lines, and includes huge 6 X 5 inch ob-round (patented design) angle-cut rolled-edge tailpipe tip in your choice of polished chrome-over stainless or high-temp black! And to help keep them looking good, there's 1/2 inch air gaps to keep heat from tarnishing the finish. Adjustable clamps let you position them on the tailpipes just right. Please note: These exhaust systems do not fit Cab/Chassis models. Banks Monster Exhaust for the 6.4L is available in the following configurations: Side Single or Side Duals. Flowtastic! Flows up to 80 percent better than stock!

Cooling as much or more than stock without killing flow is a major challenge. But Monster Exhaust wins on both counts and increases fuel efficiency in the process. Testing and Validation - Computational Fluid Dynamics (CFD) software: That's the Banks difference. Our engineers input active regeneration DPF outlet temperatures into the computer, then run flow dynamics analysis to show the cooling effect of the CoolCuff design all along the flow path. Banks Has the Solution. Engineered

CoolCuff design. The diesel particulate filter (DPF) reduces smoke by turning it to ash through regeneration. This can heat exhaust gas temps to 1,100 degrees at the DPF outlet! Banks Monster Exhaust with CoolCuff reduces these dangerous temps as much as or more than stock while also cutting backpressure and improving fuel economy.

Mandrel bent Stainless Steel construction
Virtually eliminates backpressure
Lowers exhaust gas temps
Dramatically improves flow
Maximum Airflow
4 inch constant-diameter DPF-back
CoolCuff cools tailpipe temps
Improves flow up to 50 percent
Cuts back pressure up to 40 percent
Safely clears spare tire
Huge Black tips
Fits ECSB, ECLB and CCSB: short wheel base
Note: Does not fit Cab/Chassis models
Will not work with gooseneck hitch

Monster Exhaust System, Single Exit, Black Tip for use with 2008-2010 Ford 6.4L, ECSB-CCSB Extended Cab to Crew Cab Short Bed

Item #: 49780-B Banks Power Exhaust Systems|Exhaust Systems

Banks Power Monster Exhaust System Single Exit Black Tip 08-10 Ford 6.4L All Cab and Bed Lengths Banks Power 49781-B New

Tested and refined by Banks engineers using Computational Flow Dynamics software, then validated through extensive temperature testing in all areas: before and after the DPF, 6 inch out from the tip, by the spare tire, shocks, wiring, hoses, and more. First we tested our own exhaust then we tested all of the competitors. They all tested hundreds of degrees hotter than Banks and stock! The system safely clears the spare tire, shocks and brake lines, and includes huge 6 X 5 inch ob-round (patented design) angle-cut rolled-edge tailpipe tip in your choice of polished chrome-over stainless or high-temp black! And to help keep them looking good, there's 1/2 inch air gaps to keep heat from tarnishing the finish.

Adjustable clamps let you position them on the tailpipes just right. Please note: These exhaust systems do not fit Cab/Chassis models. Banks Monster Exhaust for the 6.4L is available in the following configurations: Side Single or Side Duals. Flowtastic! Flows up to 80 percent better than stock!

Cooling as much or more than stock without killing flow is a major challenge. But Monster Exhaust wins on both counts and increases fuel efficiency in the process. Testing and Validation - Computational Fluid Dynamics (CFD) software: That's the Banks difference. Our engineers input active regeneration DPF outlet temperatures into the computer, then run flow dynamics analysis to show the cooling effect of the CoolCuff design all along the flow path. Banks Has the Solution. Engineered CoolCuff design.

The diesel particulate filter (DPF) reduces smoke by turning it to ash through regeneration. This can heat exhaust gas temps to 1,100 degrees at the DPF outlet! Banks Monster Exhaust with CoolCuff reduces these dangerous temps as much as or more than stock while also cutting backpressure and improving fuel economy.

Mandrel bent Stainless Steel construction
Virtually eliminates backpressure
Lowers exhaust gas temps
Dramatically improves flow
Maximum Airflow
4 inch constant-diameter DPF-back
CoolCuff cools temps
Improves flow up to 50 percent
Cuts back pressure up to 40 percent
BLACK tips
Fits All Cab and Bed lengths - any wheel base
Note: Does not fit Cab/Chassis models
Will not work with gooseneck hitch

Monster Exhaust System, Single Exit, Black Tip for use with 2008-2010 Ford 6.4L, All Cab and Bed Lengths

Item #: 49781-B Banks Power Exhaust Systems|Exhaust Systems

Banks Power Monster Exhaust System Single Exit Chrome Tip 08-10 Ford 6.4L All Cab and Bed Lengths Banks Power 49781 New

Tested and refined by Banks engineers using Computational Flow Dynamics software, then validated through extensive temperature testing in all areas: before and after the DPF, 6 inch out from the tip, by the spare tire, shocks, wiring, hoses, and more. First we tested our own exhaust then we tested all of the competitors. They all tested hundreds of degrees hotter than Banks and stock! The system safely clears the spare tire, shocks and brake lines, and includes huge 6 X 5 inch ob-round (patented design) angle-cut rolled-edge tailpipe tip in your choice of polished chrome-over stainless or high-temp black! And to help keep them looking good, there's 1/2 inch air gaps to keep heat from tarnishing the finish. Adjustable clamps let you position them on the tailpipes just right. Please note: These exhaust systems do not fit Cab/Chassis models. Banks Monster Exhaust for the 6.4L is available in the following configurations: Side Single or Side Duals. Flowtastic! Flows up to 80 percent better than stock! Cooling as much or more than stock without killing flow is a major challenge. But Monster Exhaust wins on both counts and increases fuel efficiency in the process. Testing and Validation - Computational Fluid Dynamics (CFD) software: That's the Banks difference. Our engineers input active regeneration DPF outlet temperatures into the computer, then run flow dynamics analysis to show the cooling effect of the CoolCuff design all along the flow path. Banks Has the Solution. Engineered CoolCuff design. The diesel particulate filter (DPF) reduces smoke by turning it to ash through regeneration. This can heat exhaust gas temps to 1,100 degrees at the DPF outlet! Banks Monster Exhaust with CoolCuff reduces these dangerous temps as much as or more than stock while also cutting backpressure and improving fuel economy.

Mandrel bent Stainless Steel construction
Virtually eliminates backpressure
Lowers exhaust gas temps
Dramatically improves flow
Maximum Airflow
4 inch constant-diameter DPF-back
CoolCuff cools temps
Improves flow up to 50 percent
Cuts back pressure up to 40 percent
CHROME tips
Fits All Cab and Bed lengths - any wheel base
Note: Does not fit Cab/Chassis models
Will not work with gooseneck hitch

Monster Exhaust System, Single Exit, Chrome Tip for use with 2008-2010 Ford 6.4L, All Cab and Bed Lengths

Item #: 49781 Banks Power Exhaust Systems|Exhaust Systems

Banks Power Monster Exhaust System Single Exit Chrome Tip 08-10 Ford 6.4L ECSB-CCSB to Banks Power 49780 New

Tested and refined by Banks engineers using Computational Flow Dynamics software, then validated through extensive temperature testing in all areas: before and after the DPF, 6 inch out from the tip, by the spare tire, shocks, wiring, hoses, and more. First we tested our own exhaust then we tested all of the competitors. They all tested hundreds of degrees hotter than Banks and stock! The system safely clears the spare tire, shocks and brake lines, and includes huge 6 X 5 inch ob-round (patented design) angle-cut rolled-edge tailpipe tip in your choice of polished chrome-over stainless or high-temp black! And to help keep them looking good, there's 1/2 inch air gaps to keep heat from tarnishing the finish. Adjustable clamps let you position them on the tailpipes just right. Please note: These exhaust systems do not fit Cab/Chassis models. Banks Monster Exhaust for the 6.4L is available in the following configurations: Side Single or Side Duals. Flowtastic! Flows up to 80 percent better than stock! Cooling as much or more than stock without killing flow is a major challenge. But Monster Exhaust wins on both counts and increases fuel efficiency in the process. Testing and Validation - Computational Fluid Dynamics (CFD) software: That's the Banks difference. Our engineers input active regeneration DPF outlet temperatures into the computer, then run flow dynamics analysis to show the cooling effect of the CoolCuff design all along the flow path. Banks Has the Solution. Engineered CoolCuff design. The diesel particulate filter (DPF) reduces smoke by turning it to ash through regeneration. This can heat exhaust gas temps to 1,100 degrees at the DPF outlet! Banks Monster Exhaust with CoolCuff reduces these dangerous temps as much as or more than stock while also cutting backpressure and improving fuel economy.

Mandrel bent Stainless Steel construction
Virtually eliminates backpressure
Lowers exhaust gas temps
Dramatically improves flow
Maximum Airflow
4 inch constant-diameter DPF-back
CoolCuff cools tailpipe temps
Improves flow up to 50 percent
Cuts back pressure up to 40 percent
Safely clears spare tire
Huge Chrome tips
Fits ECSB, ECLB and CCSB: short wheel base
Note: Does not fit Cab/Chassis models
Will not work with gooseneck hitch

Monster Exhaust System, Single Exit, Chrome Tip for use with 2008-2010 Ford 6.4L, ECSB-CCSB Extended Cab to Crew Cab Short Bed

Item #: 49780 Banks Power Exhaust Systems|Exhaust Systems

Banks Power Monster Exhaust System Single Exit DualBlack Ob Round Tips 08-10 Ford 6.4L All Cab and Bed Lengths Banks Power 49785-B New

Tested and refined by Banks engineers using Computational Flow Dynamics software, then validated through extensive temperature testing in all areas: before and after the DPF, 6 inch out from the tip, by the spare tire, shocks, wiring, hoses, and more. First we tested our own exhaust then we tested all of the competitors. They all tested hundreds of degrees hotter than Banks and stock! The system safely clears the spare tire, shocks and brake lines, and includes huge 6 X 5 inch ob-round (patented design) angle-cut rolled-edge tailpipe tip in your choice of polished chrome-over stainless or high-temp black! And to help keep them looking good, there's 1/2 inch air gaps to keep heat from tarnishing the finish. Adjustable clamps let you position them on the tailpipes just right. Please note: These exhaust systems do not fit Cab/Chassis models. Banks Monster Exhaust for the 6.4L is available in the following configurations: Side Single or Side Duals. Flowtastic! Flows up to 80 percent better than stock! Cooling as much or more than stock without killing flow is a major challenge. But Monster Exhaust wins on both counts and increases fuel efficiency in the process. Testing and Validation - Computational Fluid Dynamics (CFD) software: That's the Banks difference. Our engineers input active regeneration DPF outlet temperatures into the computer, then run flow dynamics analysis to show the cooling effect of the CoolCuff design all along the flow path. Banks Has the Solution. Engineered CoolCuff design. The diesel particulate filter (DPF) reduces smoke by turning it to ash through regeneration. This can heat exhaust gas temps to 1,100 degrees at the DPF outlet! Banks Monster Exhaust with CoolCuff reduces these dangerous temps as much as or more than stock while also cutting backpressure and improving fuel economy.

Mandrel bent Stainless Steel construction
Virtually eliminates backpressure
Lowers exhaust gas temps
Dramatically improves flow
Maximum Airflow
4 inch constant-diameter DPF-back
CoolCuff cools temps
Improves flow up to 50 percent
Cuts back pressure up to 40 percent
BLACK tips
Fits All Wheelbases, Cabs, and Beds
Does not fit Cab/Chassis models
Will not work with gooseneck hitch

Monster Exhaust System, Single Exit, Dual Black Obround Tips for use with 2008-2010 Ford 6.4L, All Cab and Bed Lengths and All Wheelbases

Item #: 49785-B Banks Power Exhaust Systems|Exhaust Systems

Banks Power Monster Exhaust System Single Exit DualBlack Ob Round Tips 08-10 Ford 6.4L ECSB-CCSB to SWB Short Wheelbase Banks Power 49784-B New

Tested and refined by Banks engineers using Computational Flow Dynamics software, then validated through extensive temperature testing in all areas: before and after the DPF, 6 inch out from the tip, by the spare tire, shocks, wiring, hoses, and more. First we tested our own exhaust then we tested all of the competitors. They all tested hundreds of degrees hotter than Banks and stock! The system safely clears the spare tire, shocks and brake lines, and includes huge 6 X 5 inch ob-round (patented design) angle-cut rolled-edge tailpipe tip in your choice of polished chrome-over stainless or high-temp black! And to help keep them looking good, there's 1/2 inch air gaps to keep heat from tarnishing the finish. Adjustable clamps let you position them on the tailpipes just right. Please note: These exhaust systems do not fit Cab/Chassis models. Banks Monster Exhaust for the 6.4L is available in the following configurations: Side Single or Side Duals. Flowtastic! Flows up to 80 percent better than stock! Cooling as much or more than stock without killing flow is a major challenge. But Monster Exhaust wins on both counts and increases fuel efficiency in the process. Testing and Validation - Computational Fluid Dynamics (CFD) software: That's the Banks difference. Our engineers input active regeneration DPF outlet temperatures into the computer, then run flow dynamics analysis to show the cooling effect of the CoolCuff design all along the flow path. Banks Has the Solution. Engineered CoolCuff design. The diesel particulate filter (DPF) reduces smoke by turning it to ash through regeneration. This can heat exhaust gas temps to 1,100 degrees at the DPF outlet! Banks Monster Exhaust with CoolCuff reduces these dangerous temps as much as or more than stock while also cutting backpressure and improving fuel economy.

Mandrel bent Stainless Steel construction
Virtually eliminates backpressure
Lowers exhaust gas temps
Dramatically improves flow
Maximum Airflow
4 inch constant-diameter DPF-back
CoolCuff cools temps
Improves flow up to 50 percent
Cuts back pressure up to 40 percent
BLACK tips
Fits Extended and Crew cab Short bed, Short wheelbase
Does not fit Cab/Chassis models
Will not work with gooseneck hitch

Monster Exhaust System, Single Exit, Dual Black Obround Tips for use with 2008-2010 Ford 6.4L, Extended Cab to Crew Cab Short Bed, Short Wheelbase

Item #: 49784-B Banks Power Exhaust Systems|Exhaust Systems

Banks Power Monster Exhaust System Single Exit DualChrome Ob Round Tips 08-10 Ford 6.4L All Cab and Bed Lengths Banks Power 49785 New

Tested and refined by Banks engineers using Computational Flow Dynamics software, then validated through extensive temperature testing in all areas: before and after the DPF, 6 inch out from the tip, by the spare tire, shocks, wiring, hoses, and more. First we tested our own exhaust then we tested all of the competitors. They all tested hundreds of degrees hotter than Banks and stock! The system safely clears the spare tire, shocks and brake lines, and includes huge 6 X 5 inch ob-round (patented design) angle-cut rolled-edge tailpipe tip in your choice of polished chrome-over stainless or high-temp black! And to help keep them looking good, there's 1/2 inch air gaps to keep heat from tarnishing the finish. Adjustable clamps let you position them on the tailpipes just right. Please note: These exhaust systems do not fit Cab/Chassis models. Banks Monster Exhaust for the 6.4L is available in the following configurations: Side Single or Side Duals. Flowtastic! Flows up to 80 percent better than stock! Cooling as much or more than stock without killing flow is a major challenge. But Monster Exhaust wins on both counts and increases fuel efficiency in the process. Testing and Validation - Computational Fluid Dynamics (CFD) software: That's the Banks difference. Our engineers input active regeneration DPF outlet temperatures into the computer, then run flow dynamics analysis to show the cooling effect of the CoolCuff design all along the flow path. Banks Has the Solution. Engineered CoolCuff design. The diesel particulate filter (DPF) reduces smoke by turning it to ash through regeneration. This can heat exhaust gas temps to 1,100 degrees at the DPF outlet! Banks Monster Exhaust with CoolCuff reduces these dangerous temps as much as or more than stock while also cutting backpressure and improving fuel economy.

Mandrel bent Stainless Steel construction
Virtually eliminates backpressure
Lowers exhaust gas temps
Dramatically improves flow
Maximum Airflow
4 inch constant-diameter DPF-back
CoolCuff cools temps
Improves flow up to 50 percent
Cuts back pressure up to 40 percent
CHROME tips
Fits All Wheelbases, Cabs, and Beds
Does not fit Cab/Chassis models
Will not work with gooseneck hitch

Monster Exhaust System, Single Exit, Dual Chrome Obround Tips for use with 2008-2010 Ford 6.4L, All Cab and Bed Lengths and All Wheelbases

Item #: 49785 Banks Power Exhaust Systems|Exhaust Systems

Banks Power Monster Exhaust System Single Exit DualChrome Ob Round Tips 08-10 Ford 6.4L ECSB-CCSB to SWB Short Wheelbase Banks Power 49784 New

Tested and refined by Banks engineers using Computational Flow Dynamics software, then validated through extensive temperature testing in all areas: before and after the DPF, 6 inch out from the tip, by the spare tire, shocks, wiring, hoses, and more. First we tested our own exhaust then we tested all of the competitors. They all tested hundreds of degrees hotter than Banks and stock! The system safely clears the spare tire, shocks and brake lines, and includes huge 6 X 5 inch ob-round (patented design) angle-cut rolled-edge tailpipe tip in your choice of polished chrome-over stainless or high-temp black! And to help keep them looking good, there's 1/2 inch air gaps to keep heat from tarnishing the finish. Adjustable clamps let you position them on the tailpipes just right. Please note: These exhaust systems do not fit Cab/Chassis models. Banks Monster Exhaust for the 6.4L is available in the following configurations: Side Single or Side Duals. Flowtastic! Flows up to 80 percent better than stock! Cooling as much or more than stock without killing flow is a major challenge. But Monster Exhaust wins on both counts and increases fuel efficiency in the process. Testing and Validation - Computational Fluid Dynamics (CFD) software: That's the Banks difference. Our engineers input active regeneration DPF outlet temperatures into the computer, then run flow dynamics analysis to show the cooling effect of the CoolCuff design all along the flow path. Banks Has the Solution. Engineered CoolCuff design. The diesel particulate filter (DPF) reduces smoke by turning it to ash through regeneration. This can heat exhaust gas temps to 1,100 degrees at the DPF outlet! Banks Monster Exhaust with CoolCuff reduces these dangerous temps as much as or more than stock while also cutting backpressure and improving fuel economy.

Mandrel bent Stainless Steel construction
Virtually eliminates backpressure
Lowers exhaust gas temps
Dramatically improves flow
Maximum Airflow
4 inch constant-diameter DPF-back
CoolCuff cools temps
Improves flow up to 50 percent
Cuts back pressure up to 40 percent
CHROME tips
Fits Extended and Crew cab Short bed, Short wheelbase
Does not fit Cab/Chassis models
Will not work with gooseneck hitch

Monster Exhaust System, Single Exit, Dual Chrome Obround Tips for use with 2008-2010 Ford 6.4L, Extended Cab to Crew Cab Short Bed, Short Wheelbase

Item #: 49784 Banks Power Exhaust Systems|Exhaust Systems

Diamond Eye Performance 2008-2010 FORD 6.4L POWERSTROKE F250/F350 (ALL CAB AND BED LENGTHS) 4in. 409 STA K4360S New 8.41963E+11

Made in USA, Increased Performance, Aggressive Sound, Affordable

Diamond Eye Manufacturing is recognized as being one of the most modern and progressive companies in eastern Oregon. The company has invested heavily to incorporate several CNC mandrel bending machines and support equipment, Enabling us to produce the finest exhaust components in today's marketplace. Mandrel bending and fabrication parameters are extensive, and a variety of tooling allows us to offer tube processing from 3/8" to 5"OD in both aluminized and stainless steel. Diamond Eye Manufacturing is located on a 23-acre complex and has immediate plans for expansion. Currently, the company utilizes over 60,000 sq. ft. for manufacturing components. Separate from the manufacturing facility, our Warehouse Distribution Center utilizes highly efficient shipping methods and a substantial amount of inventory to ensure rapid response times for delivering customer orders in a timely fashion. Our new state of the art Research and Development Center was established to keep pace with the ever changing automotive performance aftermarket. We have taken great care to outfit the facility with an array of testing equipment to provide our engineers with the information needed to design the best systems available. Many of the employees here at Diamond Eye Manufacturing have several years of experience within the industry. This wealth of knowledge and experience is tapped and transformed into results. Our promise to you is simply this, we will provide you with the highest level of customer service, quality parts, and best prices available to keep you competitive!

Item #: K4360S Diamond Eye Performance Exhaust Systems|Exhaust Systems

Diamond Eye Performance 2008-2010 FORD 6.4L POWERSTROKE F250/F350 (ALL CAB AND BED LENGTHS) 4in. ALUMINZ K4360A New 8.41963E+11

Made in USA, Increased Performance, Aggressive Sound, Affordable

Diamond Eye Manufacturing is recognized as being one of the most modern and progressive companies in eastern Oregon. The company has invested heavily to incorporate several CNC mandrel bending machines and support equipment, Enabling us to produce the finest exhaust components in today's marketplace. Mandrel bending and fabrication parameters are extensive, and a variety of tooling allows us to offer tube processing from 3/8" to 5"OD in both aluminized and stainless steel. Diamond Eye Manufacturing is located on a 23-acre complex and has immediate plans for expansion. Currently, the company utilizes over 60,000 sq. ft. for manufacturing components. Separate from the manufacturing facility, our Warehouse Distribution Center utilizes highly efficient shipping methods and a substantial amount of inventory to ensure rapid response times for delivering customer orders in a timely fashion. Our new state of the art Research and Development Center was established to keep pace with the ever changing automotive performance aftermarket. We have taken great care to outfit the facility with an array of testing equipment to provide our engineers with the information needed to design the best systems available. Many of the employees here at Diamond Eye Manufacturing have several years of experience within the industry. This wealth of knowledge and experience is tapped and transformed into results. Our promise to you is simply this, we will provide you with the highest level of customer service, quality parts, and best prices available to keep you competitive!

Item #: K4360A Diamond Eye Performance Exhaust Systems|Exhaust Systems

Diamond Eye Performance 2008-2010 FORD 6.4L POWERSTROKE F250/F350 (ALL CAB AND BED LENGTHS) 5in. 409 STA K5364S New 8.41963E+11

Made in USA, Increased Performance, Aggressive Sound, Affordable

Diamond Eye Manufacturing is recognized as being one of the most modern and progressive companies in eastern Oregon. The company has invested heavily to incorporate several CNC mandrel bending machines and support equipment, Enabling us to produce the finest exhaust components in today's marketplace. Mandrel bending and fabrication parameters are extensive, and a variety of tooling allows us to offer tube processing from 3/8" to 5"OD in both aluminized and stainless steel. Diamond Eye Manufacturing is located on a 23-acre complex and has immediate plans for expansion. Currently, the company utilizes over 60,000 sq. ft. for manufacturing components. Separate from the manufacturing facility, our Warehouse Distribution Center utilizes highly efficient shipping methods and a substantial amount of inventory to ensure rapid response times for delivering customer orders in a timely fashion. Our new state of the art Research and Development Center was established to keep pace with the ever changing automotive performance aftermarket. We have taken great care to outfit the facility with an array of testing equipment to provide our engineers with the information needed to design the best systems available. Many of the employees here at Diamond Eye Manufacturing have several years of experience within the industry. This wealth of knowledge and experience is tapped and transformed into results. Our promise to you is simply this, we will provide you with the highest level of customer service, quality parts, and best prices available to keep you competitive!

Item #: K5364S Diamond Eye Performance Exhaust Systems|Exhaust Systems

Diamond Eye Performance 2008-2010 FORD 6.4L POWERSTROKE F250/F350 (ALL CAB AND BED LENGTHS) 5in. ALUMINZ K5364A New 8.41963E+11

Made in USA, Increased Performance, Aggressive Sound, Affordable

Diamond Eye Manufacturing is recognized as being one of the most modern and progressive companies in eastern Oregon. The company has invested heavily to incorporate several CNC mandrel bending machines and support equipment, Enabling us to produce the finest exhaust components in today's marketplace. Mandrel bending and fabrication parameters are extensive, and a variety of tooling allows us to offer tube processing from 3/8" to 5"OD in both aluminized and stainless steel. Diamond Eye Manufacturing is located on a 23-acre complex and has immediate plans for expansion. Currently, the company utilizes over 60,000 sq. ft. for manufacturing components. Separate from the manufacturing facility, our Warehouse Distribution Center utilizes highly efficient shipping methods and a substantial amount of inventory to ensure rapid response times for delivering customer orders in a timely fashion. Our new state of the art Research and Development Center was established to keep pace with the ever changing automotive performance aftermarket. We have taken great care to outfit the facility with an array of testing equipment to provide our engineers with the information needed to design the best systems available. Many of the employees here at Diamond Eye Manufacturing have several years of experience within the industry. This wealth of knowledge and experience is tapped and transformed into results. Our promise to you is simply this, we will provide you with the highest level of customer service, quality parts, and best prices available to keep you competitive!

Item #: K5364A Diamond Eye Performance Exhaust Systems|Exhaust Systems

Diamond Eye Performance 2008-2010 FORD 6.4L PWR STROKE F250/F350 (ALL CAB AND BED LENGHTS)-4in. ALUMIN K4363A New 8.41963E+11

INCLUDES TURBO DIRECT PIPE 321056 (EO#D-778) Made in USA, Increased Performance, Aggressive Sound, Affordable

Diamond Eye Manufacturing is recognized as being one of the most modern and progressive companies in eastern Oregon. The company has invested heavily to incorporate several CNC mandrel bending machines and support equipment, Enabling us to produce the finest exhaust components in today's marketplace. Mandrel bending and fabrication parameters are extensive, and a variety of tooling allows us to offer tube processing from 3/8" to 5"OD in both aluminized and stainless steel. Diamond Eye Manufacturing is located on a 23-acre complex and has immediate plans for expansion. Currently, the company utilizes over 60,000 sq. ft. for manufacturing components. Separate from the manufacturing facility, our Warehouse Distribution Center utilizes highly efficient shipping methods and a substantial amount of inventory to ensure rapid response times for delivering customer orders in a timely fashion. Our new state of the art Research and Development Center was established to keep pace with the ever changing automotive performance aftermarket. We have taken great care to outfit the facility with an array of testing equipment to provide our engineers with the information needed to design the best systems available. Many of the employees here at Diamond Eye Manufacturing have several years of experience within the industry. This wealth of knowledge and experience is tapped and transformed into results. Our promise to you is simply this, we will provide you with the highest level of customer service, quality parts, and best prices available to keep you competitive!

Item #: K4363A Diamond Eye Performance Exhaust Systems|Exhaust Systems

Diamond Eye Performance 2008-2010 FORD 6.4L PWR STROKE F250/F350 (ALL CAB AND BED LENGHTS)-4in. SS K4363S New 8.41963E+11

INCLUDES TURBO DIRECT PIPE 321056 (EO#D-778) Made in USA, Increased Performance, Aggressive Sound, Affordable

Diamond Eye Manufacturing is recognized as being one of the most modern and progressive companies in eastern Oregon. The company has invested heavily to incorporate several CNC mandrel bending machines and support equipment, Enabling us to produce the finest exhaust components in today's marketplace. Mandrel bending and fabrication parameters are extensive, and a variety of tooling allows us to offer tube processing from 3/8" to 5"OD in both aluminized and stainless steel. Diamond Eye Manufacturing is located on a 23-acre complex and has immediate plans for expansion. Currently, the company utilizes over 60,000 sq. ft. for manufacturing components. Separate from the manufacturing facility, our Warehouse Distribution Center utilizes highly efficient shipping methods and a substantial amount of inventory to ensure rapid response times for delivering customer orders in a timely fashion. Our new state of the art Research and Development Center was established to keep pace with the ever changing automotive performance aftermarket. We have taken great care to outfit the facility with an array of testing equipment to provide our engineers with the information needed to design the best systems available. Many of the employees here at Diamond Eye Manufacturing have several years of experience within the industry. This wealth of knowledge and experience is tapped and transformed into results. Our promise to you is simply this, we will provide you with the highest level of customer service, quality parts, and best prices available to keep you competitive!

Item #: K4363S Diamond Eye Performance Exhaust Systems|Exhaust Systems

Diamond Eye Performance 2008-2010 FORD 6.4L PWR STROKE F250/F350 (ALL CAB AND BED LENGHTS)-5in. ALUMIN K5371A New 8.41963E+11

INCLUDES TURBO DIRECT PIPE 321056 (EO#D-778) Made in USA, Increased Performance, Aggressive Sound, Affordable

Diamond Eye Manufacturing is recognized as being one of the most modern and progressive companies in eastern Oregon. The company has invested heavily to incorporate several CNC mandrel bending machines and support equipment, Enabling us to produce the finest exhaust components in today's marketplace. Mandrel bending and fabrication parameters are extensive, and a variety of tooling allows us to offer tube processing from 3/8" to 5"OD in both aluminized and stainless steel. Diamond Eye Manufacturing is located on a 23-acre complex and has immediate plans for expansion. Currently, the company utilizes over 60,000 sq. ft. for manufacturing components. Separate from the manufacturing facility, our Warehouse Distribution Center utilizes highly efficient shipping methods and a substantial amount of inventory to ensure rapid response times for delivering customer orders in a timely fashion. Our new state of the art Research and Development Center was established to keep pace with the ever changing automotive performance aftermarket. We have taken great care to outfit the facility with an array of testing equipment to provide our engineers with the information needed to design the best systems available. Many of the employees here at Diamond Eye Manufacturing have several years of experience within the industry. This wealth of knowledge and experience is tapped and transformed into results. Our promise to you is simply this, we will provide you with the highest level of customer service, quality parts, and best prices available to keep you competitive!

Item #: K5371A Diamond Eye Performance Exhaust Systems|Exhaust Systems

Diamond Eye Performance 2008-2010 FORD 6.4L PWR STROKE F250/F350 (ALL CAB AND BED LENGHTS)-5in. SS K5371S New 8.41963E+11

INCLUDES TURBO DIRECT PIPE 321056 (EO#D-778) Made in USA, Increased Performance, Aggressive Sound, Affordable

Diamond Eye Manufacturing is recognized as being one of the most modern and progressive companies in eastern Oregon. The company has invested heavily to incorporate several CNC mandrel bending machines and support equipment, Enabling us to produce the finest exhaust components in today's marketplace. Mandrel bending and fabrication parameters are extensive, and a variety of tooling allows us to offer tube processing from 3/8" to 5"OD in both aluminized and stainless steel. Diamond Eye Manufacturing is located on a 23-acre complex and has immediate plans for expansion. Currently, the company utilizes over 60,000 sq. ft. for manufacturing components. Separate from the manufacturing facility, our Warehouse Distribution Center utilizes highly efficient shipping methods and a substantial amount of inventory to ensure rapid response times for delivering customer orders in a timely fashion. Our new state of the art Research and Development Center was established to keep pace with the ever changing automotive performance aftermarket. We have taken great care to outfit the facility with an array of testing equipment to provide our engineers with the information needed to design the best systems available. Many of the employees here at Diamond Eye Manufacturing have several years of experience within the industry. This wealth of knowledge and experience is tapped and transformed into results. Our promise to you is simply this, we will provide you with the highest level of customer service, quality parts, and best prices available to keep you competitive!

Item #: K5371S Diamond Eye Performance Exhaust Systems|Exhaust Systems

MBRP 2008-2010 Powerstroke 6.4L DPF Filter Back Dual Exhaust Systems New

MBRP Exhaust System 2008-2010 Superduty Powerstroke 6.4L DPF Filter Back Exhaust Systems

MBRP Exhaust builds the industry’s leading aftermarket performance exhaust system for your Ford Superduty Powerstroke 6.4L diesel pickup. Designed to improve your diesel’s exhaust air flow by increasing the pipes diameter, decreasing its bend angle and adding in a free flowing performance muffler MBRP has created the highest flowing exhaust system on the market. Upgrading your Powerstroke diesel’s exhaust can decrease exhaust gas temperatures, improve horsepower and increase throttle response.

Exhaust Material Options:

Aluminized Installer Series is MBRP’s original entry level and most popular system, made of 100% heavy gauge aluminized steel. (3 Year Warranty)
T409 Stainless XP Series is the perfect system for drivers that live in a wet environment, such as high humidity or snowy conditions. The Stainless Steel will prevent the exhaust system from rusting and is backed with an industry leading Life Time Warranty. (Life Time Warranty)
T304 Stainless Pro Series was designed with serious performance enthusiasts in mind. Made from the high quality stainless steel possible, this exhaust system is ready for the roughest road conditions. As an added bonus MBRP has included a double walled polished stainless steel tip that will give a custom look and style to your truck. (Life Time Warranty)

Product Features:

DPF Filter Back Exhaust System
Unique Cool Dual Aggressive Sound
Increased Exhaust Flow
Lower Exhaust Gas Temperatures

Product Vehicle Applications:

2008-2010 Ford Super Duty Powerstroke 6.4L Diesel

Item #: S6244AL MBRP Exhaust Exhaust Systems|Exhaust Systems

MBRP 2008-2010 Powerstroke 6.4L DPF Filter Back Exhaust System New

MBRP Exhaust System 2008-2010 Superduty Powerstroke 6.4L DPF Filter Back Performance Exhaust Systems

MBRP Exhaust builds the industry’s leading aftermarket performance exhaust system for your Ford Superduty Powerstroke 6.4L diesel pickup. Designed to improve your diesel’s exhaust air flow by increasing the pipes diameter, decreasing its bend angle and adding in a free flowing performance muffler MBRP has created the highest flowing exhaust system on the market. Upgrading your Powerstroke diesel’s exhaust can decrease exhaust gas temperatures, improve horsepower and increase throttle response.

Exhaust Material Options:

Aluminized Installer Series is MBRP’s original entry level and most popular system, made of 100% heavy gauge aluminized steel. (3 Year Warranty)
Aluminized P-Series functions the same as the Installer Series, made from 100% heavy gauge aluminized steel, the P-Series however features a two piece tail pipe and no tip is included. Perfect for drivers looking for a great exhaust system whiles keeping to a set budget. (2 Year Warranty)
T409 Stainless XP Series is the perfect system for drivers that live in a wet environment, such as high humidity or snowy conditions. The Stainless Steel will prevent the exhaust system from rusting and is backed with an industry leading Life Time Warranty. (Life Time Warranty)
T304 Stainless Pro Series was designed with serious performance enthusiasts in mind. Made from the high quality stainless steel possible, this exhaust system is ready for the roughest road conditions. As an added bonus MBRP has included a double walled polished stainless steel tip that will give a custom look and style to your truck. (Life Time Warranty)
Aluminized Black Series is the latest growing trend in the diesel industry, made from Aluminized steel and coated in a specially designed high heat black coating, the MBRP Black Series will turn heads while providing the performance gains customers have come to expect. (1 Year Coating Warranty 3 Year Exhaust Warranty)

Product Features:

DPF Filter Back Exhaust System
Aggressive Sound
Increased Exhaust Flow
Lower Exhaust Gas Temperatures

Product Vehicle Applications:

2008-2010 Ford Super Duty Powerstroke 6.4L Diesel

Item #: S6242AL MBRP Exhaust Exhaust Systems|Exhaust Systems