PowerTech Diesel - Piping

Each Hose is designed to meet 3x their working pressure; Utilizing 4, 5 plies of DuPont Nomex / Aramid fiber (no inferior Polyester is used); Higher pressure applications have a Red Iron Oxide internal color; Flurosilicone elastomers and Fluorocarbon withstands oily residues; Spring loaded 300 Series Stainless Steel band clamping force remains consistent through heat cycles; Many specific kits for specific vehicles, turbochargers and intercoolers

Upgrade from stock 0.84 A/R housing; Increase performance by reducing back pressure; Lower EGTs

Replaces factory exhaust feed system which is prone to leakage; Prevents loss of turbo drive pressure and increased EGT's; Crush donuts replaced with stainless steel gaskets for extended sealing life; Maximizes transfer of heat energy to the turbo; Less restrictive, internally shielded expansion bellows; Reduces the chance for piping burn out; High-silicon ductile iron Y-adapter

Mishimoto has developed a cold-side intercooler pipe and boot kit for the 2003-2007 6.0L Powerstroke. If your 6.0L Powerstroke came with a plastic intercooler pipe and you are tired of it blowing off the intake manifold or are nervous it is going to burst under boost, the Mishimoto intercooler kit is a perfect fit for your truck! The factory pipe and boot features numerous restrictive bends and does not stand a chance against the heat and pressure of your high-powered 6.0L; upgrade to the Mishimoto kit for increased reliability, durability, and performance. The Mishimoto Cold-Side Pipe is constructed of mandrel-bent aluminum with a polished finish and eliminates restrictive bends in the factory pipe, allowing for improvements in airflow, power, and EGTs.

Mishimoto has developed an aluminum intake elbow specifically for the 2003--2007 Ford 6.0L Powerstroke! This intake elbow removes the tight bend that is evident on the stock inake elbow and allows for greater airflow! The Mishimoto intake elbow works with either the stock plastic or aluminum cold side pipe or the Mishimoto cold side pipe! The Mishimoto intake elbow also comes with a new silicone cold side boot with Duracore Technology to replace your worn out stock boot. In addition, we also include a new O-ring gasket and constant-tension T-bolt clamps for hassle-free installation. The Mishimoto intake elbow also features two pre-tapped 1/8" NPT sensor bungs for any added sensors or injection systems to make this product extremely versatile. The indented beadroll allows the stock or Mishimoto boot to grip onto the edge of the pipe, eliminating the chance of boost leaks. The Mishimoto intake elbow comes in a polished, wrinkle black, or all-new wrinkle blue finish to really set your truck apart! Like all products, this also comes with the Mishimoto lifetime warranty you can trust!

Mishimoto has developed an aluminum intake elbow specifically for the 2003--2007 Ford 6.0L Powerstroke! This intake elbow removes the tight bend that is evident on the stock inake elbow and allows for greater airflow! The Mishimoto intake elbow works with either the stock plastic or aluminum cold side pipe or the Mishimoto cold side pipe! The Mishimoto intake elbow also comes with a new silicone cold side boot with Duracore Technology to replace your worn out stock boot. In addition, we also include a new O-ring gasket and constant-tension T-bolt clamps for hassle-free installation. The Mishimoto intake elbow also features two pre-tapped 1/8" NPT sensor bungs for any added sensors or injection systems to make this product extremely versatile. The indented beadroll allows the stock or Mishimoto boot to grip onto the edge of the pipe, eliminating the chance of boost leaks. The Mishimoto intake elbow comes in a polished, wrinkle black, or all-new wrinkle blue finish to really set your truck apart! Like all products, this also comes with the Mishimoto lifetime warranty you can trust!

Mishimoto has developed an aluminum intake elbow specifically for the 2003--2007 Ford 6.0L Powerstroke! This intake elbow removes the tight bend that is evident on the stock inake elbow and allows for greater airflow! The Mishimoto intake elbow works with either the stock plastic or aluminum cold side pipe or the Mishimoto cold side pipe! The Mishimoto intake elbow also comes with a new silicone cold side boot with Duracore Technology to replace your worn out stock boot. In addition, we also include a new O-ring gasket and constant-tension T-bolt clamps for hassle-free installation. The Mishimoto intake elbow also features two pre-tapped 1/8" NPT sensor bungs for any added sensors or injection systems to make this product extremely versatile. The indented beadroll allows the stock or Mishimoto boot to grip onto the edge of the pipe, eliminating the chance of boost leaks. The Mishimoto intake elbow comes in a polished, wrinkle black, or all-new wrinkle blue finish to really set your truck apart! Like all products, this also comes with the Mishimoto lifetime warranty you can trust!

Mishimoto has developed an intercooler pipe and boot kit for the 2003-2007 Ford 6.0L Powerstroke.Factory piping has numerous restrictive bends that impede airflow and choke the power of your truck.The Mishimoto intercooler piping is manufactured in the USA and is engineered to eliminate unnecessary bends, which provides increased airflow and power.The Mishimoto intercooler pipe kit includes DuraCore boots and constant-tension T-bolt clamps.Mishimoto DuraCore technology is the synthetic material that comprises the innermost layer of all Mishimoto silicone diesel boots.Compared to normal silicone, DuraCore provides superior resistance to heat, pressure, fuel, and oil.This effectively increases the life of our boots by preventing leaks and blowouts.For greater improvements in charge-air cooling, pair this piping kit with the Mishimoto performance intercooler.The Mishimoto 6.0L Powerstroke intercooler pipe and boot kit includes our signature lifetime warranty.