Ram Truck Heavy Duty Steering Kit 94-99 Ram 1500/2500/3500 4x4 Synergy MFG

Steering that stays tight

This kit swaps the stock drag link and tie rod on 1994-1999 Ram 4x4 trucks for much stronger Synergy parts. Synergy keeps the factory T-style layout, so there is none of the toe change the old Y-style linkage gave and none of the bump steer that many crossover kits bring in. Nothing on the knuckles needs drilling or reaming; it bolts in where the stock parts came out.

The drag link is 1-1/2 in. x .250 wall DOM, bent to clear the factory axle brackets, and works from stock height to about 4 in. of lift; past that you will need a drop pitman arm. The tie rod is 1-1/2 in. x .188 wall 4130 chromoly, heat treated, roughly twice as strong as stock, and sits about 2 in. higher for extra ground clearance. Both use Synergy double adjuster sleeves so you can set length on the truck, plus greaseable metal-on-metal ends with low-misalignment boots that stop tie rod flop and the dead spot it causes.

Who it's for

Owners of 1994-1999 solid-axle Ram 4x4 trucks with worn, bent or sloppy factory steering, stock or lifted.

Key specs (per Synergy)

What's included

• Drag link (heavy-duty)
• Tie rod (heavy-duty)
• Stabilizer clamp for the tie rod
• Greaseable Synergy ends, installed

Fitment notes

• Fits 1994-1999 Dodge Ram 1500 / 2500 / 3500 4x4.

Professional install available at Powertech Diesel, Idaho Falls — call 208-542-7793.