Ram Heavy Duty Drag Link 03-13 Dodge Ram 1500/2500/3500 4X4 Synergy MFG

A drag link that will not bend

This is the drag link from Synergy's 2003-2013 Ram steering kit (8525-01), sold on its own. Synergy keeps the factory T-style layout, so there is none of the toe change the old Y-style linkage gave and none of the bump steer that many crossover kits bring in. Nothing on the knuckles needs drilling or reaming; it bolts in where the stock parts came out.

It is 1-1/2 in. x .250 wall DOM, bent to clear the factory axle brackets, and works from stock height up to about 4 in. of lift (more lift calls for a drop pitman arm). A double adjuster sleeve lets you set length without pulling the link, and greaseable metal-on-metal ends with low-misalignment boots keep it from flopping.

Who it's for

2003-2013 Ram 4x4 owners replacing a bent or worn drag link, or building the Synergy kit in stages.

Key specs (per Synergy)

What's included

• Heavy-duty drag link with Synergy HD tie rod ends installed
• Double adjuster sleeve

Fitment notes

• Fits 2003-2013 Dodge Ram 2500 4x4 and 2003-2012 Ram 3500 4x4 (also 2006-2008 Ram 1500 Mega Cab 4x4).
• Ram built the 2013 3500 two ways. Early builds have the drag link bolted to the tie rod (T layout); late builds on the radius-arm chassis run the drag link to the knuckle. Confirm yours before you order.
• Synergy pairs it with its heavy-duty tie rod; it is not meant to run with the stock tie rod.
• This is the drag link only; the complete kit is 8525-01.

Professional install available at Powertech Diesel, Idaho Falls — call 208-542-7793.