Heated Fuel Filter Conversion Kit for 2003-2018 Dodge Ram Cummins Fleece Performance

Filtration and fuel heat in one base

This is Fleece's full-featured filter conversion for the 2003-2018 Cummins. It takes the standard Fleece kit and adds a high-flow fuel heater built into the filter base, with everything needed to route, plumb and filter fuel from a Fleece lift pump to the injection pump.

The filter is easier to reach than the factory one, and it takes a Donaldson 3 micron filter and water separator, so routine filter changes are simpler.

Who it's for

Owners of 2003-2018 Dodge/Ram 2500/3500 5.9L and 6.7L Cummins trucks running a Fleece lift pump who want easier filter service and fuel heat.

Key specs (per Fleece)

What's included

• Filter base with built-in heater and mounting hardware
• Donaldson 3 micron filter / water separator
• Push-lock hose with AN and barb fittings
• Feed fittings to suit 5.9L or 6.7L CP3s
• Water-in-fuel sensor and adapter harness

Fitment notes

• Fits 2003-2018 Dodge/Ram 2500/3500 with the 5.9L or 6.7L Cummins (per Fleece).
• Requires Fleece's factory filter housing block-off kit, installed already or bought separately.
• No quick-disconnect fitting for the OE lift pump is included. With a stock sending unit, use FPE-QUCON-OE-38 to get an AN connection at the factory quick-disconnect.

Professional install available at Powertech Diesel, Idaho Falls — call 208-542-7793.