A HUBB Oil Filter will be the last oil filter you will ever buy. They are made of the highest quality materials and are simply manufactured to a higher standard. They also carry a 100,000-mile warranty.
Typical filters use a bypass valve that allows unfiltered oil back into your engine. This is a feature to help the oil flow to ensure lubrication at all times when it is cold and or a heavier weighted grade. The issue with that is that the oil flowing through the bypass valve is picking up all of the contaminants and re-introducing them into your engine. The effects can be devastating to your engine.
THE HUBB DIFFERENCE:
HUBB Filters continues to filter oil even while operating in bypass mode by using the integrated secondary filtration system. HUBB Oil Filters are also beta-tested. The beta ratio is a test of an oil filters efficiency. The HUBB Oil Filters have a beta ratio of 75, which means that the filters are a consistent 98.666%, that is a very good rating for a re-usable oil filter.
How easy is the filter to install?
It takes about ten minutes to install the filter in a driveway or just a few minutes on a lift. It's as simple as if you can screw in a light bulb you can install this filter.
Can I clean and maintain the filter myself?
Yes, you can definitely clean the oil filter yourself using brake cleaner and a little elbow grease, however, in order to maintain the 100,000-mile warranty, HUBB requires the filters to be cleaned using an Ultrasonic Cleaner, available separately. HUBB Oil Filter recommends removal and cleaning of the filter every 3000 miles.
FEATURES & BENEFITS:
- Filter-in-a-filter design that is 99% efficient at removing oil contaminants at 25 microns (versus 52% for conventional filters)
- Two pressure differential valves for increased oil flow and engine safety
- Filter is made of surgical stainless 316L weave and is cased with a hardened aluminum shell.
- All internal parts are easy to clean and reusable
- Entire filter is completely recyclable – no waste
- Filter can be drained 100% of oil – does not capture and hold oil in filter like paper filters (approximately 5 ounces per filter)
- Improve oil flow by up to 5 times, when compared to conventional filters, to reduce engine friction
- Produce an oil flow rate of up to 50 gallons/minute, compared to 10-12 gallons/minute for conventional filters
- Require only .2 PSI/gallon to push oil flow, compared to 7 PSI/gallon for conventional filters
- Increase contaminant storage capacity by 5 times, but do not accumulate unrecyclable oil like conventional filters
- Reduce carbon monoxide emissions by up to 30% and nitric oxide emissions by up to 16%
- Double your standard oil change interval reducing oil costs by 50% or more
- Ability to have Hubb clean the filters and manage your filter core inventory for you
- Hubb oil consultants will test your virgin and used oil to ensure you are maximizing your oil life between changes and using the best oil for your application.
- 100,000 Mile or 5,000 Hour Performance Guarantee
- Filter tool sold separately
Write the First Review!